English [Español]
United States [Change]
Products > Climbing-Equipment > Stages > Stages > WNS Series > WNS-2416 14 in W x 16 ft L Nestable Stage > WNS-2416

Product Image
WNS-2416

Resources

  •  
  •  
  •  View WNS Series Page
  •  
  •  
  •  Replacement Parts
  • Share
  •  Email page | Print this page

Accessories

Complementary Products

You May Also Consider

WNS-2416 14 in W x 16 ft L Nestable Stage


Performance Overview

Side Rail LengthPlatform WidthLoad Capacity
16 ft14 in500 lbs

The WNS series of nestable stages provide consistent rail depths regardless of stage length, reducing trip hazards when making a continuous work platform. Made of aluminum, the handles nest inside of each other to minimize gaps between walkways. 2 person, 500 lbs rated. Available in 14 in, 20 in, and 24 in widths in lengths from 12 ft to 24 ft.




Features

  • Lightweight aluminum with vinyl-covered handles that nest to create continuous work platform
  • Available in 14 in, 20 in, and 24 in widths, in lengths from 12 ft to 24 ft
  • Ideally suited for pumpjack applications
  • 2-Person - 500 lbs Rated
  • Continuous Work Platform Reduces Trip Hazard


Specifications

FeatureSize / Details
Side Rail Length16 ft
Platform Width14 in
Load Capacity500 lbs
CertificationsANSI A10.8 (2001); OSHA
Approx. Cu. Ft. Per Unit9.6
Approx. Shipping Weight Lbs.63




Package Contents

Part NumberQtyDescription

Dimensions

FeatureSize
Side Rail Depth6 in


Additional WNS Series Models

Model No.Side Rail LengthPlatform WidthApprox. Cu. Ft. Per UnitApprox. Shipping Weight Lbs.Buy Online
WNS-241212 ft14 in7.246
WNS-241616 ft14 in9.663
WNS-242020 ft14 in1286
WNS-242424 ft14 in14.4115
WNS-251212 ft20 in10.254
WNS-251616 ft20 in13.675
WNS-252020 ft20 in17103
WNS-252424 ft20 in20.4122
WNS-261212 ft24 in1262
WNS-261616 ft24 in1681
WNS-262020 ft24 in20116
WNS-262424 ft24 in24139


Can 2 nestable planks be supported at the joint by a pump jack underneath? Is there a mechanism to join them together like a hinge pin?

Asked by: Anonymous
Yes 2 nestable stages are to be supported at the joint by a pump jack. Once the stages are nested together you would secure them to the pump jack with the chain and hardware provided.
Answered by: Werner Customer Care
Date published: 2017-07-20

Can this stage be used on titan scaffolding

Asked by: Anonymous
The WNS-2620 is a nestable stage that we recommend using on Werner systems only for safety purposes.
Answered by: Werner Customer Care
Date published: 2015-07-08

Where can I find an operator's manual for the 2420 aluminum plank?

Asked by: Anonymous
All of the safety and use information is located on the labels on the side of the plank. It is required that this information be visible on the plank, for ease of reference during use.
Answered by: Werner Customer Care
Date published: 2015-10-08

Can a stage be cut down and still meet the weight standards? dose it violate OSHA reqirements?

Asked by: Anonymous
The Werner Co does not recommend modifying the products in any way. This may include cutting, drilling holes, adding to the product, or altering the product in any way. Modifications such as this are not approved by OSHA. The WNS-2620 plank does come in shorter lengths, such as the WNS-2612 and WNS-2616.
Answered by: Werner Customer Care
Date published: 2013-10-22

Do the handles contribute to the listed length?

If the handles are not accounted for in the length listed, are they easily removed?
Asked by: Anonymous
The WNS nestable stages create a continuous work platform. The handles are not removable. The handles are not accounted to the length.
Answered by: Werner Customer Care
Date published: 2016-12-09

Can they be nested side by side

Can the planks be nested side by side and if so is there any detail on securing them from separating?
Asked by: Anonymous
The Nestable Stages are designed to be used so that the stages are laid end to end. The nestable stages have a rounded handle, and the decking extended further toward the end of the stage. When these stages are laid together, there should be 1 inch or less of a gap between the decks to minimize the trip hazard. Along with the supports below the stages, the platforms should restrained by lashing platforms together through the opening created by the overlapped endcaps.
Answered by: Werner Customer Care
Date published: 2014-07-01

Can a 20" x 20' section be used as a dock gangway if proper supports are employed?

Plan to attach pipe supports with pads 1' from shore end and attach custom pin fittings to join existing fittings on wheeled 48" x 24' dock section?
Asked by: Anonymous
No, this is not recommended. There is no way to tell how many people will be on the stage at a time.
Answered by: Werner Customer Care
Date published: 2016-06-09

Accessories

I have this platform werner 2612. 12' long 24"wide. 500lb capacity. Im looking to use it on the side of my house. I cant seem to find attachments for it. Like does it hang off the side off the roof. What do i attach to the roof. What do i attach to the bottom of the stage to support it.
Asked by: Anonymous
We suggest using the stage on a Werner Pump Jack System, or on Werner Ladder Jacks. We do not manufacture anything for suspension.
Answered by: Werner Customer Care
Date published: 2016-04-05
  • y_2017, m_8, d_18, h_13CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_en_US, sid_WNS-2416, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_werner



Different types of ladders are designed to keep you safe and productive when climbing or standing. Using the wrong style of ladder or simply ignoring the limitations of climbing equipment can result in a fall or serious injury.
Height is referring to the actual ladder height. Extension ladders should be 7 to 10 feet longer than the highest support or contact point, which may be the wall or roof line. The highest standing level is four rungs down from the top. The highest permitted standing level on a stepladder is two steps down from the top.

Reach height is the maximum reach assuming a 5’6” person with a vertical 12” reach.
Ladders are designed to safely hold up to a specific amount of weight. The Werner Performance System defines five different capacities using a color and star rating system. The Duty Rating is defined as the maximum safe load capacity of the ladder. A person’s fully clothed weight plus the weight of any tools and materials that are carried onto the ladder must be less than the load capacity.

Werner offers ladder made from fiberglass and aluminum. Each material has characteristics which make it best for certain applications, or one material may simply fit the personal preferences of the user. For example, if working around electricity users should select fiberglass products due to their non-conductive side rails.