English [Español]
United States [Change]
Products > Climbing-Equipment > Extension Ladders > D6200-2 Series > D6224-2 24 ft Type IA Fiberglass D-Rung Extension Ladder > D6224-2

Product Image
D6224-2D6224-2D6224-2D6224-2D6224-2D6224-2D6224-2D6224-2D6224-2

Resources

  •  
  •  
  •  View D6200-2 Series Page
  •  
  •  Series Comparison
  •  Replacement Parts
  • Share
  •  Email page | Print this page

Accessories

Complementary Products

You May Also Consider

D6224-2 24 ft Type IA Fiberglass D-Rung Extension Ladder


Performance Overview

SizeStyleReach HeightLoad CapacityPerformance Rating
24 ftMulti Section23 ft300 lbs

The D6224-2 two section fiberglass extension ladder has non-conductive rails making this ladder ideal for working near electricity. With a duty rating of 300 pounds, the D6224-2 is durable and long lasting. The exclusive ALFLO® rung joint means TWIST-PROOF® performance on the job. The TRACTION-TRED® D rungs are slip resistant and the side rails are interlocking. The dual action feet are for use on hard or penetrable surfaces and swivel easily. The base and fly sections separate easily to use the base section as a single ladder. The durable rail shield bracket and shoe help protect the bottom of the rail. The fly section rails are pre-pierced at the top for easy field installation of accessories.




Features

  • Exclusive ALFLO® rung joint means TWIST-PROOF® performance
  • 1-5/8 in slip-resistant TRACTION-TRED® D-rungs
  • Smooth operating pulley with polypropylene rope
  • Interlocking Side Rails with internal rail guides on bottom of fly section securely connect rails
  • External guides at top of base section securely interlock rails
  • Heavy Duty extruded rung locks are spring loaded to operate smoothly
  • Pre-pierced holes for easy field installation of accessories
  • Base and fly separate easily to use base section as single ladder
  • Combination rail shield bracket and shoe with SHU-LOK® and slip-resistant pad
  • Molded rung braces on bottom step for increased durability
  • Mar-resistant molded end caps


Specifications

FeatureSize / Details
Size24 ft
Max. Open Extended Length21 ft
StyleMulti Section
Load Capacity300 lbs
MaterialFiberglass
Rung TypeD-Rung
Foot MaterialSlip-resistant pad
Number of Sections2
Base Width19 in outside shoes
CertificationsANSI A14.5 (2007); OSHA
Reach Height23 ft
Approx. Shipping Weight Lbs.52
Approx. Cu. Ft. Per Unit10.3
Performance Rating




Package Contents

Part NumberQtyDescription

Dimensions

FeatureSize
Rails Dimension3-5/16 in
Flange Dimension1-3/16 in
Rung Dimension1-5/8 in
Fly Width16 in


Additional D6200-2 Series Models

Model No.SizeMax. Open Extended LengthApprox. Closed LengthReach HeightApprox. Shipping Weight Lbs.Approx. Cu. Ft. Per UnitBuy Online
D6216-2
Not equipped with rope and pulley
16 ft13 ft8 ft15 ft36.57
D6220-220 ft17 ft10 ft19 ft44.58.7
D6224-224 ft21 ft23 ft5210.3
D6228-228 ft25 ft27 ft59.512
D6232-232 ft29 ft31 ft71.513.7
D6236-236 ft32 ft18 ft34 ft80.515.3
D6240-240 ft35 ft37 ft88.517


D6224-2 24 ft Type IA Fiberglass D-Rung Extension Ladder is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from Excellent quality with an excellent price. Purchased this a few months ago and appreciate the stability which standard aluminum ladders can't seem to provide.
Date published: 2015-09-02
  • y_2017, m_8, d_14, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_D6224-2, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_werner

When the extension ladder is unextended and claw feet in place, the ladder comes to a rest on the feet instead of the locking clamp?

I assume this is intentional?
Asked by: Anonymous
The ladder locks should always be fully engaged when the ladder is in use. When using the ladder with the feet in this position, the fly section should be raised one rung to fully engage the locks.
Answered by: Werner Customer Care
Date published: 2014-03-25

can you use only one section of this ladder by it self?

Asked by: Anonymous
You can use the base section of the D6224-2 as a straight ladder. You cannot use the fly section alone as a straight ladder.
Answered by: Werner Customer Care
Date published: 2016-10-23

how do i get this ladder with a protop

Asked by: Anonymous
Please contact our customer care department at 888-523-3370 Monday through Friday 8 AM till 5 PM EST to order/inquire about the replacement part/assistance you are seeking. Please have your complete model number at the time of your call.
Answered by: Werner Customer Care
Date published: 2015-11-25

D6224-2 chemical resistance

Do D6224-2 Fiberglass extension ladders have chemical resistance against chlorine bleach to be used in pressure washer applications.
Asked by: Anonymous
Our fiberglass ladders do not have a specific resistance to chlorine bleach, however they are resistant to many of it's ingredients such as chlorine dioxide
Answered by: Werner Customer Care
Date published: 2015-11-09

What is the difference between D6224-2 and D6324-2 ?

Asked by: Anonymous
The D6200-2 and the D6300-2 are equivalent ladders in features and weight rating. The D6224-2 is an orange fiberglass, and the D6324-2 is a red fiberglass.
Answered by: Werner Customer Care
Date published: 2015-10-28

For D6224-2-24, can the BASE & FLY sections easily be detached / re-attaced to facilitate storage? Where are instructions on how to this?

You recommend not storing ladders via straps in order to prevent twisting and bowing. Lying them on edge on a flat surface with the FLY stacked atop the BASE would minimize pressure points and minimize use of floor space. Can I stack the FLY section on top of the BASE section? Stacking allows the two pieces to hug a wall, and if on a ledge, makes it easier to lift them individually. However, its been impossible to find instructions on how to detach the Fly Section and properly reassemble the sections.
Asked by: Anonymous
lease contact our customer care department at 888-523-3370 Monday through Friday 8 AM till 5 PM EST to inquire about the assistance you are seeking
Answered by: Werner Customer Care
Date published: 2016-10-12

one of the feet came off my fiberglass ladder and has disappeared how do i replace it?

Asked by: Anonymous
Please contact Customer Care at 888-523-3370 Monday through Friday from 8:00 AM to 5:00 PM EST. Please have your mark/mk number available. This information is required, so we can determine the correct replacement part number. Please go to the following link, to see how to find this information: http://parts.wernerco.com/Home/HowToFind
Answered by: Werner Customer Care
Date published: 2017-05-12

where they are manufactured these products , which is the origin ??

Asked by: Anonymous
The D6200-2 series of fiberglass extension ladders are manufactured in Mexico. In recent years Werner Co. has expanded globally to become the world leader in the manufacturing and distribution of ladders, climbing equipment and ladder accessories. Werner is now available in new markets and product categories and has added manufacturing and distribution facilities in the U.S. and around the world to satisfy global demand
Answered by: Werner Customer Care
Date published: 2016-07-31

can this ladder be stored unprotected outside?

Asked by: Anonymous
Exposure to the sunlight and weathering can affect resin coating on a fiberglass ladder. A ladder left in these conditions can experience a Surface Weathering or Fiber Bloom. In this situation it is recommended to recoat the ladder. Please visit the Literature section of our website to find the Fiberglass Technical Manual for further information and treatment for a fiberglass ladder.
Answered by: Werner Customer Care
Date published: 2014-07-30

Can I use the level system on a fiberglass ladder?

Asked by: Anonymous
You can use the PK80-2 leg leveler or the PK70-2 leg leveler on this model of ladder. Keep in mind that the PK80-2 is a permanent install.
Answered by: Werner Customer Care
Date published: 2016-10-23
  • y_2017, m_8, d_14, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_84
  • loc_en_US, sid_D6224-2, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_werner



Different types of ladders are designed to keep you safe and productive when climbing or standing. Using the wrong style of ladder or simply ignoring the limitations of climbing equipment can result in a fall or serious injury.
Height is referring to the actual ladder height. Extension ladders should be 7 to 10 feet longer than the highest support or contact point, which may be the wall or roof line. The highest standing level is four rungs down from the top. The highest permitted standing level on a stepladder is two steps down from the top.

Reach height is the maximum reach assuming a 5’6” person with a vertical 12” reach.
Ladders are designed to safely hold up to a specific amount of weight. The Werner Performance System defines five different capacities using a color and star rating system. The Duty Rating is defined as the maximum safe load capacity of the ladder. A person’s fully clothed weight plus the weight of any tools and materials that are carried onto the ladder must be less than the load capacity.

Werner offers ladder made from fiberglass and aluminum. Each material has characteristics which make it best for certain applications, or one material may simply fit the personal preferences of the user. For example, if working around electricity users should select fiberglass products due to their non-conductive side rails.