English [Change]
United States [Change]
Products > Climbing-Equipment > Pump Jacks > PJ Series > PJ-100 Aluminum Pump Jack

PJ-100 PJ-100 PJ-100 PJ-100 PJ-100

Resources

Accessories

Complimentary Products

You May Also Consider

PJ-100 Aluminum Pump Jack


Performance Overview


The PJ series aluminum pump jack components are versatile, dependable, and easy to operate. Featuring field-replaceable components, they are compatible and interchangeable with the leading competitor. Pump jacks, aluminum poles, support braces, work benches, end rail kits, and safety nets are included in this series and work with Werner Nestable Stages.




Features

  • Aluminum frame Z channel is 20% stronger than leading competitor
  • Large boot strap and slip resistant lever
  • Interchangeable with leading competition


Specifications

FeatureSize / Details
ComponentPump Jack
CertificationsANSI A10.8 (2001); OSHA
Approx. Cu. Ft. Per Unit3.47
Approx. Shipping Wt. Lbs.35




Package Contents

Part NumberQtyDescription

Dimensions

FeatureSize


Additional PJ Series Models

Model No.ComponentApprox. Cu. Ft. Per UnitApprox. Shipping Wt. Lbs.
PJ-100Pump Jack3.4735
PJ-12PPole0.8528
PJ-18PPole1.2742
PJ-24PPole1.6956
PJ-6PPole0.4315
PJ-ERNEnd Rail Kit1.1620
PJ-ERWEnd Rail Kit1.1620
PJ-PCPole Connector0.4614
PJ-PF-4Pole Foot0.153
PJ-SBFFoldable Support Brace0.7110
PJ-SBRRigid Support Brace2.7214
PJ-SNSafety Net0.8910
PJ-WBWork Bench2.0620


(23 Questions : 23 Answers)

Product Q&A

Ask your questions. Share your answers.

 
 
« Back
 
 
2 weeks, 4 days ago
Customer avatar
by
Dan
Maryland
Age: 35-44
Gender: Male
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Per OSHA a guardrail system can be any material such as screens, mesh, intermediate vertical members, etc. They need to be installed between the top edge of the guardrail system and the walking/working surface when there is no wall or parapet wall at least 21 inches high. These materials that can be used as a guardrail shall be capable of withstanding a force of at least 150lbs applied in any downward or outward direction. The PJ-SN complies with all these things. We do have installation instructions available for the PJ-SN. If you would like a copy of these please contact customers care M-F 8am-5pm EST at 888-523-3370.
2 weeks, 4 days ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
PJ-100 Aluminum Pump Jack
 
1 answer

HAVE THE PJ 100 ALWAYS BEEN MADE IN CHINA

Customer avatar
by
BRIAN
MADISON HEIGHTS,MI
3 months, 2 weeks ago
Customer avatar
by
BRIAN
MADISON HEIGHTS,MI
Age: 45-54
Gender: Male
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Yes the PJ-100's have always been made in China.
3 months, 2 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
PJ-SBF Aluminum Pump Jack Foldable Support Brace
 
1 answer

How do I know when my safety net is no longer serviceable?

Customer avatar
by
John
Roanoke, VA, USA
1 month, 4 weeks ago
Customer avatar
by
John
Roanoke, VA, USA
Age: 35-44
Gender: Male
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Per OSHA safety nets need to be inspected once a week for wear, damage, and other types of deterioration. If the net has any sort of rip, hole, or tear, the net needs to be taken out of service.
1 month, 3 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
PJ-SBR Aluminum Pump Jack Rigid Support Brace
 
1 answer

Will either of the support braces allow you to tie off to a metal roof? If so how would you accomplish this?

Customer avatar
by
Trucker
Cincinnati, OH, USA
3 months ago
Customer avatar
by
Trucker
Cincinnati, OH, USA
Age: 35-44
Gender: Male
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Unfortunately we cannot suggest attached the support braces to a metal roof for safety purposes.
2 months, 4 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
PJ-PC Aluminum Pump Jack Pole Connector
 
1 answer

Is this compatible with alumapole poles?

Customer avatar
by
josh
Asheville, NC, USA
3 months, 1 week ago
Customer avatar
by
josh
Asheville, NC, USA
Age: 35-44
Gender: Male
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
The PJ-PC's are only tested with Werner Co pump jack poles so we cannot suggest using them with alumapole poles.
3 months, 1 week ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
4 months, 3 weeks ago
Customer avatar
by
Jay
Hawaii
Age: Over 65
Gender: Male
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
When the work bench is closed it measures 20.45". When it is fully open it extends to 31.6".
4 months, 2 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
4 months, 4 weeks ago
Customer avatar
by
Adam
Stamford, CT, USA
Age: 45-54
Gender: Male
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Please contact our Customer Care Department when convenient at 888-523-3370 Monday through Friday 8 AM till 5 PM EST for further details on your issue and/or question.
4 months, 3 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
5 months ago
Customer avatar
by
Anonymous
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
30.8"
5 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
PJ-100 Aluminum Pump Jack
 
1 answer

if I go 48ft high with aluminum pump jacks do I have to have a center brace

Customer avatar
by
nk
minnesota
6 months ago
Customer avatar
by
nk
minnesota
Age: 45-54
Gender: Male
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
With the pump jack system, anytime you go above 24ft you need to make sure you have a support brace every 16ft.
6 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
6 months ago
Customer avatar
by
JTC
Freemansburg, PA, USA
Age: 35-44
Gender: Male
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
To pass an intermediate support brace on a pump jack system, temporary support braces are required. The temporary support brace is installed above the intermediate brace so that the intermediate brace can be removed while passing. Refer to the instructions for further details on passing an intermediate brace.
6 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2next>>
  • 2015-07-28T16:28:09.244-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_PJ-100, prod, sort_default
2next>>



Different types of ladders are designed to keep you safe and productive when climbing or standing. Using the wrong style of ladder or simply ignoring the limitations of climbing equipment can result in a fall or serious injury.
Height is referring to the actual ladder height. Extension ladders should be 7 to 10 feet longer than the highest support or contact point, which may be the wall or roof line. The highest standing level is four rungs down from the top. The highest permitted standing level on a stepladder is two steps down from the top.

Reach height is the maximum reach assuming a 5’6” person with a vertical 12” reach.
Ladders are designed to safely hold up to a specific amount of weight. The Werner Performance System defines five different capacities using a color and star rating system. The Duty Rating is defined as the maximum safe load capacity of the ladder. A person’s fully clothed weight plus the weight of any tools and materials that are carried onto the ladder must be less than the load capacity.

Werner offers ladder made from fiberglass and aluminum. Each material has characteristics which make it best for certain applications, or one material may simply fit the personal preferences of the user. For example, if working around electricity users should select fiberglass products due to their non-conductive side rails.