English [Change]
United States [Change]
Products > Climbing-Equipment > Attic Ladders > W Series > W2510 25 in W x 54 in L x 10 ft H Ceiling Wood Attic Ladder

W2510
YouTube Video V20IF7YYhPw

Resources

Accessories

Complimentary Products

You May Also Consider

W2510 25 in W x 54 in L x 10 ft H Ceiling Wood Attic Ladder


Performance Overview

SizeStyleRough Opening Width x LengthLoad CapacityPerformance RatingMaterial
10 ftFolding25 in x 54 in250 lbsWood

The W2510 wood attic ladder has a duty rating of 250 pounds and comes fully assembled and ready to install. Full wrap-around door hinge minimizes heat loss. The quality door is ready for staining or painting. The pull string eases the opening and closing. Hinges butt metal to metal to maintain ladder rigidity. Counter-balance mechanism eliminates sag and springiness.




Features

  • Counter-balance mechanism eliminates sag and springiness
  • Full wrap-around door hinge minimizes heat loss
  • Quality door can be painted or stained
  • Hinges butt metal to metal to maintain ladder rigidity
  • Pull string allows for easy operation
  • Easy to open and close
  • Fully assembled and ready to install


Specifications

FeatureSize / Details
Size10 ft
Floor to Ceiling Height Range8 ft 9 in to 10 ft 4 in
Rough Opening Width x Length25 in x 54 in
Load Capacity250 lbs
Performance Rating
Ladder Width16-3/4 in
Landing Space Range5 ft 3 in
Swing Clearance6 ft 2 in
Foot Materialwood
Locking DeviceSpring
Opening DeviceRope
Door MaterialPlywood
Frame MaterialPine
Full Width Door hingeYes
Metal-to-Metal Rail hingeYes
Requires Cutting Foot AngleYes
Number of People for Installation2
CertificationsANSI A14.9 (2010)
Approx. Cu. Ft. Per Unit9.3
Approx. Shipping Wt. Lbs.58




Package Contents

Part NumberQtyDescription

Dimensions

FeatureSize
Rail Size3/4 in x 3-1/2 in
Step Length15-1/4 in
Step Width3-1/2 in
Grooved Steps-Actual Lumber Size3/4 in x 3-1/2 in
Rough Opening Width x Length25 in x 54 in


Additional W Series Models

Model No.SizeFloor to Ceiling Height RangeRough Opening Width x LengthLadder WidthLanding Space RangeSwing Clearance
W22088 ft7 ft to 8 ft 9 in22-1/2 in x 54 in14-1/4 in4 ft 6 in5 ft 4 in
W221010 ft8 ft 9 in to 10 ft 4 in22-1/2 in x 54 in14-1/4 in5 ft 3 in6 ft 2 in
W25088 ft7 ft to 8 ft 9 in25 in x 54 in16-3/4 in4 ft 6 in5 ft 4 in
W251010 ft8 ft 9 in to 10 ft 4 in25 in x 54 in16-3/4 in5 ft 3 in6 ft 2 in


(39 Questions : 39 Answers)

Product Q&A

Ask your questions. Share your answers.

 
 
« Back
 
 
W2208 22.5 in W x 54 in L x 8 ft H Ceiling Wood Attic Ladder
 
1 answer

Can I still buy replacement parts for attic ladder W2208

2 months, 1 week ago
Customer avatar
by
Buzz
PA
Age: 35-44
Gender: Male
I need new medal arms , One has bent
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
We do still manufacture the W2208 and have several replacement parts available. Please call customer service with your model number and mark number of your ladder. 888-523-3370
2 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
W2210 22.5 in W x 54 in L x 10 ft H Ceiling Wood Attic Ladder
 
1 answer

WH2210 vs WU2210

2 months, 2 weeks ago
Customer avatar
by
B
Tampa
Age: 35-44
Gender: Male
Is WH2210 "heavy" duty compared to the WU2210? The WH2210 at Lowes shows a max weight of 350 and the WU2210 at Home Depot shows a max weight os 250. Just thicker wood?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
These ladders are made with the same type of wood. The WH has slightly thicker wood used for the rails. The location of rivets also play a factor in the duty rating of this ladder.
2 months, 1 week ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
WU2210 22.5 in W x 54 in L x 8-10 ft H Ceiling Wood Attic Ladder
 
1 answer

Joist are 17" apart,do you make one to fit

Customer avatar
by
Jt fixet
Winston-Salem, NC, USA
2 months, 3 weeks ago
Customer avatar
by
Jt fixet
Winston-Salem, NC, USA
Age: 55-65
Gender: Male
Do you make pull down for 17" joist Clearence
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Please contact our Customer Care Department when convenient at 888-523-3370 Monday through Friday 8 AM till 5 PM EST for further details on your issue and/or question.
2 months, 2 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
3 months, 2 weeks ago
Customer avatar
by
John K
Ohio, USA
Age: 55-65
Gender: Male
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
3/8"x3"
3 months, 1 week ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
WU2210 22.5 in W x 54 in L x 8-10 ft H Ceiling Wood Attic Ladder
 
1 answer

Does Werner make a attic ladder that meets firecode?

Customer avatar
by
A320Filtros
Mesa, AZ, USA
3 months, 3 weeks ago
Customer avatar
by
A320Filtros
Mesa, AZ, USA
Age: 45-54
Gender: Male
I have one in my home now that we are selling and was told by the inspector that the ladder doesn't meet the fire rating code and must replace it. Or is there a work around?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
We currently do not manufacture a fire rated attic ladder.
3 months, 3 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
W2210 22.5 in W x 54 in L x 10 ft H Ceiling Wood Attic Ladder
 
1 answer

Where??

4 months ago
Customer avatar
by
ibworkin
Gender: Male
Looking for new replacement parts for W2210 ladder and I do not see any on the replacement website. Where can I find them?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Please contact our customer care department at 888-523-3370 Monday through Friday 8 AM till 5 PM EST to order/inquire about the replacement part/assistance you are seeking. Please have your complete model number and MK/MARK number off of your model number label at the time of your call.
4 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
W2208 22.5 in W x 54 in L x 8 ft H Ceiling Wood Attic Ladder
 
1 answer

Bottom rung missing. How do I buy replacement step and wire support?

4 months, 1 week ago
Customer avatar
by
Pat
Jacksonville, Fl
Gender: Female
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Unfortunately we do not manufacture replacement steps for our attic ladder. Please call customer service @ 888-523-3370.
4 months, 1 week ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
W2210 22.5 in W x 54 in L x 10 ft H Ceiling Wood Attic Ladder
 
1 answer

Repair or replace?

5 months ago
Customer avatar
by
HP
Idaho, USA
Age: 45-54
Gender: Male
I have a W2210 ladder, and the legs have splits where they attach to the lower hinge. The damage starts at the hinge rivets. Are the legs replaceable/repairable, or do I need to replace the entire unit? What would be the cause of this type of damage? Which current models would be appropriate replacements?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Unfortunately the legs are not repairable and you would need to replace the entire unit. The leg splitting could be caused by several things such as exceeding the duty rating, moisture, age, etc. If you want to stick with a wood attic ladder, the model is something that is still manufactured. If you want a wood ladder with a higher duty rating you would want the WH2210.
4 months, 3 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
W2210 22.5 in W x 54 in L x 10 ft H Ceiling Wood Attic Ladder
 
1 answer

Fire rating in a garage application

Customer avatar
by
Todd Foxworth
Arizona, USA
6 months ago
Customer avatar
by
Todd Foxworth
Arizona, USA
Age: 35-44
Gender: Male
Is the plywood fire rated on this model? If not how does Werner suggest you achieve this? Please let me know
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
The door on this ladder is not fire rated. We do not manufacture or suggest any kind of product to make this fire rated.
6 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
W2208 22.5 in W x 54 in L x 8 ft H Ceiling Wood Attic Ladder
 
1 answer

Pivot plate rivet

Customer avatar
by
Mary
San Diego, CA, USA
7 months ago
Customer avatar
by
Mary
San Diego, CA, USA
I need to replace the hinge mechanism on w2208.
I know I will need to order the set of 2 but the rivet on the pivot plate snapped off. Direction say to keep rivet plate and drill into the rivet to allow for the screw etc. Can I still use the existing pivet plate with the screw and bolt to connect the replacement hinge assembly, even though the rivet is not there. The screw would then be the pivet
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Yes we suggest that you use the existing pivot plate when installing the new mechanisms.
6 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2next>>
  • 2015-03-27T17:34:39.899-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_W2510, prod, sort_default
2next>>



Different types of ladders are designed to keep you safe and productive when climbing or standing. Using the wrong style of ladder or simply ignoring the limitations of climbing equipment can result in a fall or serious injury.
Height is referring to the actual ladder height. Extension ladders should be 7 to 10 feet longer than the highest support or contact point, which may be the wall or roof line. The highest standing level is four rungs down from the top. The highest permitted standing level on a stepladder is two steps down from the top.

Reach height is the maximum reach assuming a 5’6” person with a vertical 12” reach.
Ladders are designed to safely hold up to a specific amount of weight. The Werner Performance System defines five different capacities using a color and star rating system. The Duty Rating is defined as the maximum safe load capacity of the ladder. A person’s fully clothed weight plus the weight of any tools and materials that are carried onto the ladder must be less than the load capacity.

Werner offers ladder made from fiberglass and aluminum. Each material has characteristics which make it best for certain applications, or one material may simply fit the personal preferences of the user. For example, if working around electricity users should select fiberglass products due to their non-conductive side rails.