English [Español]
United States [Change]
Products > Climbing-Equipment > Attic Ladders > AH Series > AH2510 25 in W x 54 in L x 8 ft to 10 ft H Ceiling Aluminum Attic Ladder

Product Image
AH2510 AH2510 AH2510 AH2510
YouTube Video zvzQMts-giM

Resources

  •  
    Visit Attic Micro Site
  •  
  •   View AH Series Page
  •   Model AH2510 User Guide
  •   Series Comparison
  •  Replacement Parts
  • Share
  •  Email page | Print this page

Accessories

Complementary Products

You May Also Consider

AH2510 25 in W x 54 in L x 8 ft to 10 ft H Ceiling Aluminum Attic Ladder


Performance Overview

SizeStyleRough Opening Width x LengthLoad CapacityPerformance RatingMaterial
8 ft to 10 ftFolding25 in x 54 in375 lbsAluminum

The AH2510 universal attic ladder is lightweight, yet carries a duty rating of 375 pounds. The strut design eliminates springs and allows for a wide access opening. Easy to open and close. Wide steps are slip resistant and the feet are non-marring. Available for standard or extra-wide openings.




Features

  • Extra-wide access opening
  • Easy to open, smooth closing
  • Slip-resistant extra wide steps
  • Non-marring feet
  • Fits all ceiling heights from 8 ft to 10 ft


Specifications

FeatureSize / Details
Size8 ft to 10 ft
Floor to Ceiling Height Range7 ft 8 in to 10 ft 3 in
Rough Opening Width x Length25 in x 54 in
Load Capacity375 lbs
Performance Rating
Ladder Width17-1/8 in
Landing Space Range4 ft to 5 ft 3 in
Swing Clearance5 ft 10 in
Foot MaterialAluminum with rubber bottom
Locking DeviceGas Strut
Opening DeviceRope
Door MaterialPlywood
Frame MaterialPine
Full Width Door hingeYes
Metal-to-Metal Rail hingeYes
Requires Cutting Foot AngleNo
Number of People for Installation2
CertificationsANSI A14.9 (2010)
Approx. Shipping Wt. Lbs.52
Approx. Cu. Ft. Per Unit7.57

Same model is available as AH2510B at Home Depot


Package Contents

Part NumberQtyDescription

Dimensions

FeatureSize
Rail Size1-1/2 in x 2-3/8 in
Flange Dimension1-1/2 in
Step Length15-1/16 in
Step Width3 in
Rough Opening Width x Length25 in x 54 in


Additional AH Series Models

Model No.SizeFloor to Ceiling Height RangeRough Opening Width x LengthLadder WidthLanding Space RangeSwing Clearance Buy Online
AH2210
Same model is available as AH2210B at Home Depot
8 ft to 10 ft7 ft 8 in to 10 ft 3 in22-1/2 in x 54 in14-1/8 in4 ft to 5 ft 3 in5 ft 10 in
AH2510
Same model is available as AH2510B at Home Depot
8 ft to 10 ft7 ft 8 in to 10 ft 3 in25 in x 54 in17-1/8 in4 ft to 5 ft 3 in5 ft 10 in
AH251212 ft10 ft 5 in to 12 ft25 in x 66 in17-1/8 in5 ft 11 in7 ft 3 in


AH2510 25 in W x 54 in L x 8 ft to 10 ft H Ceiling Aluminum Attic Ladder is rated 2.0 out of 5 by 1.
Rated 2 out of 5 by from Warranty? What Warranty? (NOTE: I believe the model I have is no longer made. On the Home Depot receipt, the SKU shows "3632") I bought these stairs for a garage attic in 2005. They get used rarely, and I would be close to correct if I said they've been used about 50 times total over the last 12 years. Today, one of the articulating joints - the one with the red release handle - busted as I was folding the ladder to go back up. I called their customer support and was told there was nothing they could do for me because this was not a replaceable part. I have my original purchase receipt from Home Depot, but can't find the user guide to tell me what the warranty is, so...I got online and checked Werner's site. I was surprised to find an FAQ that said "we don't offer a warranty on our products, but we do stand behind them". I may be old school, but "stand behind them" has always meant to me "if it breaks, you can trust us to take care of you". What I got on the call today was lip service. Needless to say, I won't be buying another Warner ladder.
Date published: 2017-01-06
  • y_2017, m_1, d_14, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_AH2510, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=AGE, direction=DESCENDING)]
  • clientName_werner
(181 Questions : 182 Answers)

Product Q&A

Ask your questions. Share your answers.

 
 
« Back
 
 
AH2510 25 in W x 54 in L x 8 ft to 10 ft H Ceiling Aluminum Attic Ladder
 
1 answer

Will this ladder work on a sloped ceiling? It appears that the arms will hinder ladder from reaching a longer angle

Customer avatar
by
Sloped configuration
San Diego, CA, USA
5 days ago
Customer avatar
by
Sloped configuration
San Diego, CA, USA
Age: 55-65
Gender: Male
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Unfortunately this will not, we currently do not manufacture an attic ladder that is able to be installed with sloped ceilings.
3 days ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
AH2510 25 in W x 54 in L x 8 ft to 10 ft H Ceiling Aluminum Attic Ladder
 
1 answer

do you ever answer anything other than call us

1 week, 5 days ago
Customer avatar
by
bill
Hendersonville, tennesse
Age: 55-65
Gender: Male
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
We try to ensure that these questions are answered accurately, and in a timely manner, In some scenarios additional information is required to correctly answer questions. And it is recommended to contact our customer care department directly so that we can assist with these requests.
3 days ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
AH2510 25 in W x 54 in L x 8 ft to 10 ft H Ceiling Aluminum Attic Ladder
 
1 answer

What is the mark number on this ladder ah2510

1 month, 1 week ago
Customer avatar
by
Booboo
Texas, USA
Age: 45-54
Gender: Male
I need to order the spring assist for it or better yet I would like to order an attic ladder that has the spring assist with it. I thought you offered that in the past.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Please contact Customer Care at 888-523-3370 Monday through Friday from 8:00 AM to 5:00 PM.
1 month ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
AH2210 22.5 in W x 54 in L x 8 ft to 10 ft H Ceiling Aluminum Attic Ladder
 
1 answer

What is the dimension between the inside lift hardware?

1 week, 3 days ago
Customer avatar
by
Steve
Why don't you mention this in the specifications area
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Approximately 11.5 to 12 inches. The ladder width is approximately 14 1/8".
5 days ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
AH2510 25 in W x 54 in L x 8 ft to 10 ft H Ceiling Aluminum Attic Ladder
 
1 answer

How do I know what model to buy?

2 months, 1 week ago
Customer avatar
by
Anonymous
Brooklyn, NY, USA
Age: 45-54
Gender: Female
I need to replace an attic access ladder, but there is no label on the ladder to reference. The ladder is wood and has two coil springs attached to counter-levers/arms which are mounted on metal plates with bolts. The ladder has three ink stamps: "For residential use only", "300lbs" and "Feb 2002". The access door on which the ladder is mounted measures 24" x 52.5". What model should I buy to replace this and where can I find it?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
For this you will need to reference your rough opening dimension, as well as your floor to ceiling height range. For any assistance please contact our customer care department at 888-523-3370 Monday through Friday 8 AM till 5 PM EST
2 months, 1 week ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
1 month ago
Customer avatar
by
Dan
California, USA
Age: 55-65
Gender: Male
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
The width of the ladder of the AH2512 is 17 1/8".
Your rough opening is 25" x 66". I would allow
at least 6" for the ladder and door for your length.
Approximately 17" wide by 55-60" length.
1 month ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
AH Series Universal Aluminum Attic Ladders
 
1 answer

Cutting the AH2512 legs to proper length

Customer avatar
by
locus
ohio
1 month, 2 weeks ago
Customer avatar
by
locus
ohio
Gender: Male
I am installing the Werner Model AH2512, my floor to ceiling height is 125.3/4", according to the instruction manual chart i should cut off 21.1/4" from the ladder legs but when i measured the legs the cut falls right in line with one of the steps. Should i make it a bit longer as to not cut into the step?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Please contact Customer Care at 888-523-3370 Monday through Friday from 8:00 AM to 5:00 PM.
1 month, 1 week ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
1 month, 4 weeks ago
Customer avatar
by
Enrico
California, USA
Age: 45-54
Gender: Male
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
For this we will need to know the ceiling height the ladder would be installed at, as well as the dimensions of the rough opening for the ladder. Please contact our customer care department at 888-523-3370 Monday through Friday 8 AM till 5 PM EST to inquire about the technical assistance you are seeking
1 month, 4 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
AH Series Universal Aluminum Attic Ladders
 
1 answer

Installation of AH series attic latters

Customer avatar
by
tom
Sugar Land, TX, USA
2 months, 1 week ago
Customer avatar
by
tom
Sugar Land, TX, USA
Age: 55-65
Gender: Male
Do I require 16d nails or 3"X1/4' lag bolts to install this
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
For this installation you will need an additional (10) 2" deck screws.
2 months, 1 week ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
-3points
0out of 3found this answer helpful.
Was this helpful?helpful0unhelpful3
AH2512 25 in W x 66 in L x 12 ft H Ceiling Aluminum Attic Ladder
 
1 answer

My attic ladder came with additional support spring loaded arms Where are they to be installed

2 months, 1 week ago
Customer avatar
by
joe
Oviedo, FL, USA
Age: 55-65
Gender: Male
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Please contact our customer care department at 888-523-3370 Monday through Friday 8 AM till 5 PM EST to inquire about the assistance you are seeking
2 months, 1 week ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
2 3 4 5... 7next>>
  • 2017-01-15 T09:48:30.742-06:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_AH2510, prod, sort_default
2 3 4 5... 7next>>



Different types of ladders are designed to keep you safe and productive when climbing or standing. Using the wrong style of ladder or simply ignoring the limitations of climbing equipment can result in a fall or serious injury.
Height is referring to the actual ladder height. Extension ladders should be 7 to 10 feet longer than the highest support or contact point, which may be the wall or roof line. The highest standing level is four rungs down from the top. The highest permitted standing level on a stepladder is two steps down from the top.

Reach height is the maximum reach assuming a 5’6” person with a vertical 12” reach.
Ladders are designed to safely hold up to a specific amount of weight. The Werner Performance System defines five different capacities using a color and star rating system. The Duty Rating is defined as the maximum safe load capacity of the ladder. A person’s fully clothed weight plus the weight of any tools and materials that are carried onto the ladder must be less than the load capacity.

Werner offers ladder made from fiberglass and aluminum. Each material has characteristics which make it best for certain applications, or one material may simply fit the personal preferences of the user. For example, if working around electricity users should select fiberglass products due to their non-conductive side rails.