English [Español]
United States [Change]
Products > Climbing-Equipment > Stages > Stages > 3100 Series > 3124 24 in W x 24 ft L Stage

Product Image


  •   View 3100 Series Page
  •  Replacement Parts
  • Share
  •  Email page | Print this page


Complementary Products

You May Also Consider

3124 24 in W x 24 ft L Stage

Performance Overview

Side Rail LengthPlatform WidthLoad Capacity
24 ft24 in750 lbs

The 3124 stage platforms offer a 750 lbs duty rating and allows for 3 people on one plank. The TWIST-PROOF® design is ideal for ladder jack applications, swing stages or catwalks. Each stage is 24 in wide and 24 ft long.


  • Individual slip-resistant decking minimizes paint or material build-up
  • Vinyl-coated end caps serve as hand grips and protect from sharp edges and surface marks
  • Double end rung provides extra rigidity on stages 20 ft or longer
  • 3-Person - 750 lbs Rated


FeatureSize / Details
Side Rail Length24 ft
Platform Width24 in
Load Capacity750 lbs
CertificationsANSI A10.8 (2001); OSHA
Approx. Cu. Ft. Per Unit24
Approx. Shipping Weight Lbs.145

Package Contents

Part NumberQtyDescription


Side Rail Depth6 in
Side Rail Flange2 in

Additional 3100 Series Models

Model No.Side Rail LengthApprox. Cu. Ft. Per UnitApprox. Shipping Weight Lbs. Buy Online
311212 ft7.9264
311616 ft13.4492
312020 ft16.8115
312424 ft24145
312828 ft28204
313232 ft32236
313636 ft36323
313939 ft39365

If I support the Aluminum pick at its midspan, may I increase the pick's capacity?

Our application is using the aluminum picks to make a 2' tall platform. The platform is used to give height to install wall rebar. We intend to have 5 people per 16' span. If we added a midspan support, can this be achieved?
Asked by: Anonymous
The weight capacity of the platform is the maximum weight that should ever be loaded onto the plank.
Answered by: Werner Customer Care
Date published: 2015-10-09

What is the maximum spacing between vertical supports?

If the 3100 series is supported at each end, what is the maximum spacing between supports to maintain the 750 pound load capacity?
Asked by: Anonymous
The stages are designed and tested to meet the load rating when the stages are supported with just one support on each end of the stage. The stages do not require any additional support along the length of the stage to maintain the capacity.
Answered by: Werner Customer Care
Date published: 2015-11-24

Can the stage be supported by the handles at each end?

In my application the stage will be used as a catwalk. The general question is what are the support requirements? By the handles at each end, by the last rung at each end, must the side rails be supprted?
Asked by: Anonymous
These are not intended to be hung or supported by the handles.
Answered by: Werner Customer Care
Date published: 2017-03-30

What type of aluminum is used in stages or what grade.

I damaged a stage severally, and I'm wanting to scrap it instead of a total loss but not knowing much about scrap I'm trying to have a little knowledge so when I arrive I'm not put in the trick bag so to speak.
Asked by: Anonymous
Answered by: Werner Customer Care
Date published: 2017-01-10

What is the overall dimension for a 16 foot stage?

The information states that the side rail is 16 foot long for a 16 foot stage, is the dimension the total out to out dimension of the plank including the handles at the end of the plank?
Asked by: Anonymous
The length dimension of the stage is the overall length of just the side rails. The handles do add additional length to the overall assembly. For the 3116, each handles adds 2.5 inches to the overall length.
Answered by: Werner Customer Care
Date published: 2015-11-24

Is there a max incline the stage can be set at?

Using to ramp down to a lower elevation
Asked by: Anonymous
Per OSHA and ANSI the scaffold needs to be level while in use.
Answered by: Werner Customer Care
Date published: 2016-01-29

Can this be a single 750 lb. load located anywhere on the plank, or several smaller loads along the length that total 750 lbs.?

Asked by: Anonymous
This can be a single 750lb load located anywhere on the plank.
Answered by: Werner Customer Care
Date published: 2016-04-03

Can a 16' long 3116 stage plank be cut down in size to 12' and used with same or higher load capacity?

Owner owns several 16' long planks, but needs to use them in an application that limits their length to about 12' long. He wants to just cut the long planks shorter and use them as such. End connections not a problem because ends of planks will be set on top flange of steel beams and typical end connection will not used in this application.
Asked by: Anonymous
We cannot suggest cutting the stage. This would affect the duty rating/integrity of the stage. We cannot suggest this for safety purposes.
Answered by: Werner Customer Care
Date published: 2016-03-22

If a center support is added to the 3116, 2' x 16' stage, can the load capacity be increased?

Is there a problem with bracing the aluminum side beams bottom flange at the center support per compression flange bracing requirements for beams?
Asked by: Anonymous
We cannot suggest adding a center support to the stage. This is something that has not been tested by our engineers so we cannot make any suggestions for safety purposes.
Answered by: Werner Customer Care
Date published: 2016-03-22

Personnel Load Distribution

Are rated loads for these stages, (i.e. 750 lbs = 3 persons) applicable for any load distribution? Can all three people be standing at midspan of the pick at the same time, or are they assumed to be spaced some distance apart?
Asked by: Anonymous
Please contact our Customer Care Department when convenient at 888-523-3370 Monday through Friday 8 AM till 5 PM EST for further details on your issue and/or question.
Answered by: Werner Customer Care
Date published: 2015-11-24
  • y_2017, m_6, d_23, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_US, sid_3124, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_werner

Different types of ladders are designed to keep you safe and productive when climbing or standing. Using the wrong style of ladder or simply ignoring the limitations of climbing equipment can result in a fall or serious injury.
Height is referring to the actual ladder height. Extension ladders should be 7 to 10 feet longer than the highest support or contact point, which may be the wall or roof line. The highest standing level is four rungs down from the top. The highest permitted standing level on a stepladder is two steps down from the top.

Reach height is the maximum reach assuming a 5’6” person with a vertical 12” reach.
Ladders are designed to safely hold up to a specific amount of weight. The Werner Performance System defines five different capacities using a color and star rating system. The Duty Rating is defined as the maximum safe load capacity of the ladder. A person’s fully clothed weight plus the weight of any tools and materials that are carried onto the ladder must be less than the load capacity.

Werner offers ladder made from fiberglass and aluminum. Each material has characteristics which make it best for certain applications, or one material may simply fit the personal preferences of the user. For example, if working around electricity users should select fiberglass products due to their non-conductive side rails.