English [Español]
United States [Change]
Products > Climbing-Equipment > Stages > Stages > 2000 Series > 2012 12 in W x 12 ft L Stage

Product Image


  •   View 2000 Series Page
  •  Replacement Parts
  • Share
  •  Email page | Print this page


Complementary Products

You May Also Consider

2012 12 in W x 12 ft L Stage

Performance Overview

Side Rail LengthPlatform WidthLoad Capacity
12 ft12 in250 lbs

Aluminum decorator plank is twist proof and designed for one person use with a 250 pound load rating. Slip-resistant decking minimizes paint or material build up. The stage is 12 in wide and 12 ft long and has vinyl coated end caps.


  • Individual slip-resistant decking minimizes paint or material build-up
  • Vinyl-coated end caps serve as hand grips and protect from sharp edges and surface marks
  • Rated 250 lbs total for user and equipment


FeatureSize / Details
Side Rail Length12 ft
Platform Width12 in
Load Capacity250 lbs
CertificationsANSI A10.8 (2001); OSHA
Approx. Cu. Ft. Per Unit3.96
Approx. Shipping Weight Lbs.36

Package Contents

Part NumberQtyDescription


Side Rail Depth4 in
Side Rail Flange1-3/8 in

Additional 2000 Series Models

Model No.Side Rail LengthApprox. Cu. Ft. Per UnitApprox. Shipping Weight Lbs. Buy Online
20088 ft2.6425
201212 ft3.9636
201616 ft5.2848
202020 ft6.665
202424 ft7.9278

Can this plank be used with two double stepladders to make a temporary scaffold?

Asked by: Anonymous
Scaffolding planks may be used in conjunction with step ladders as explained by OSHA standards. Two step ladders shall be set up, with the scaffolding plank secured between the two ladders. Please refer to the guidelines for specifics on how to set up, secure, and use the scaffolding system.
Answered by: Werner Customer Care
Date published: 2013-12-13

Use with ladder jacks?

Can the 2012 stage be used with ladder jacks?
Asked by: Anonymous
Yes you can
Answered by: Werner Customer Care
Date published: 2017-06-19

Mounting this to I-beams

I want to mount this to (2) I- beams. How much overhang is allowed. What is best way to mount them?
Asked by: Anonymous
All aluminum planks should be supported a minimum of 12 inches and a maximum of 18 inches on each end. Planks should be secured to the supports using U-Bolts or other suitable means. Tie-offs or guy wires are recommended to support the plank to prevent tipping.
Answered by: Werner Customer Care
Date published: 2016-01-19


Asked by: Anonymous
The 2016 Plank has a 4 inch side rail depth.
Answered by: Werner Customer Care
Date published: 2013-11-04

What are the weights per linear foot of the stages?

Specifically 2012, 2612, 2616, 2624
Asked by: Anonymous
Weight limit for 2012 is 250 lbs. evenly distributed. Weight limit for 2612, 2616, and 2624 is 500 lbs. evenly distributed. Weights per linear foot is not available.
Answered by: Werner Customer Care
Date published: 2016-12-02

Warranty / replacement part?

I currently own this pick which I purchased last year. One of the end handles has since broken/snapped. Is this covered under warranty? If not, how do I go about ordering a replacement part? Thank you in advance for your timely response.
Asked by: Anonymous
The replacement part you require is a 50-8. Please note this item is a special order item for most distributors. Please visit our website at www.wernerco.com and utilize our distributor locator to identify the nearest distributors in your area.
Answered by: Werner Customer Care
Date published: 2013-10-22

Can I store this in an area that will get rained on when I am not using it?

Asked by: Anonymous
Never store material on planks. Always keep planks free of foreign material. Do not permit oil, grease, or slippery material to accumulate on climbing or gripping surfaces. Our planks are made of aluminum, they are also made to be used outside, rain will not hurt them.
Answered by: Werner Customer Care
Date published: 2016-05-20

Is the 2020 suitable for a work bench or are the actual work-bench benches a different product?

Asked by: Anonymous
On the pump jack system, the work bench is the component that holds the stage such as the 2020. The stage itself rest on a work bench located by each pole. The 2020 is a suitable stage to use on the work bench.
Answered by: Werner Customer Care
Date published: 2015-03-09

What is the deflection of a 2016 in the center?

What is the deflection distance of a 2016 when supported the recommended 12" from each end and loaded with 250# in the center?
Asked by: Anonymous
The maximum deflection depends on the load applied. We test to UL1322. The maximum deflection of this model in the center with a 250lb load applied is almost 14”.
Answered by: Werner Customer Care
Date published: 2014-10-03

Connecting Planks

Are the 2000 series planks able to be joined through the handles end to end? I see that you have a "nestable" stage that is intended for this, but is the same connection possible with a 2000 series plank? What are the differences between these two planks? Thank You
Asked by: Anonymous
They 2000 series planks are not joined by the handles end to end, like the nestable stages. That is the difference between the two planks,.
Answered by: Werner Customer Care
Date published: 2016-10-12
  • y_2017, m_6, d_25, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_12
  • loc_en_US, sid_2012, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_werner

Different types of ladders are designed to keep you safe and productive when climbing or standing. Using the wrong style of ladder or simply ignoring the limitations of climbing equipment can result in a fall or serious injury.
Height is referring to the actual ladder height. Extension ladders should be 7 to 10 feet longer than the highest support or contact point, which may be the wall or roof line. The highest standing level is four rungs down from the top. The highest permitted standing level on a stepladder is two steps down from the top.

Reach height is the maximum reach assuming a 5’6” person with a vertical 12” reach.
Ladders are designed to safely hold up to a specific amount of weight. The Werner Performance System defines five different capacities using a color and star rating system. The Duty Rating is defined as the maximum safe load capacity of the ladder. A person’s fully clothed weight plus the weight of any tools and materials that are carried onto the ladder must be less than the load capacity.

Werner offers ladder made from fiberglass and aluminum. Each material has characteristics which make it best for certain applications, or one material may simply fit the personal preferences of the user. For example, if working around electricity users should select fiberglass products due to their non-conductive side rails.