English [Español]
United States [Change]
Products > Climbing-Equipment > Scaffolding > Scaffold Components > BN Series > BN-10 10 ft Narrow Span Horizontal-Diagonal Brace - Scaffold > BN-10

Product Image


  •  View BN Series Page
  •  Replacement Parts
  • Share
  •  Email page | Print this page


Complementary Products

You May Also Consider

BN-10 10 ft Narrow Span Horizontal-Diagonal Brace - Scaffold

Performance Overview

Table DescriptionTower StyleType of Component
10 ft narrow span horizontal-diagonal braceNarrow SpanHorizontal-Diagonal Brace

The BN series aluminum narrow span horizontal-diagonal braces are available in 6 ft, 8 ft, and 10 ft lengths. Components are available separately for flexibility to convert to a different length or height scaffold tower.


  • Aluminum scaffold components provide the most flexibility during installation
  • Enables end user to easily convert to different length or height scaffold towers
  • All components available separately
  • Ideal for rental yards and theatrical and entertainment applications


FeatureSize / Details
Table Description10 ft narrow span horizontal-diagonal brace
Tower StyleNarrow Span
Type of ComponentHorizontal-Diagonal Brace
Approx. Shipping Weight Lbs.6
Approx. Cu. Ft. Per Unit0.46

Package Contents

Part NumberQtyDescription



Additional BN Series Models

Model No.Table DescriptionApprox. Shipping Weight Lbs.Approx. Cu. Ft. Per UnitBuy Online
BN-1010 ft narrow span horizontal-diagonal brace60.46
BN-66 ft narrow span horizontal-diagonal brace0.3
BN-88 ft narrow span horizontal-diagonal brace50.38

Is this used to make the X on the base

All pieces I have are marked with either a D or an H with the D a bit longer than the H. Understandably the D would be the hypotenuse thus longer, but don't seem to be useful for making the X at the base. Is the BN-6 used for making the X on the base of the 6 foot wide?
Asked by: LMerryman
Yes, the BN-6 installation instructions are below: Attach horizontal-diagonal brace to the vertical post of one frame just above the first horizontal. Attach other end of brace to opposite side of other frame at the same height. Repeat with other horizontal-diagonal brace to form an “X.”
Answered by: Werner Customer Care
Date published: 2017-07-17
  • y_2017, m_10, d_16, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_BN-10, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_werner

Different types of ladders are designed to keep you safe and productive when climbing or standing. Using the wrong style of ladder or simply ignoring the limitations of climbing equipment can result in a fall or serious injury.
Height is referring to the actual ladder height. Extension ladders should be 7 to 10 feet longer than the highest support or contact point, which may be the wall or roof line. The highest standing level is four rungs down from the top. The highest permitted standing level on a stepladder is two steps down from the top.

Reach height is the maximum reach assuming a 5’6” person with a vertical 12” reach.
Ladders are designed to safely hold up to a specific amount of weight. The Werner Performance System defines five different capacities using a color and star rating system. The Duty Rating is defined as the maximum safe load capacity of the ladder. A person’s fully clothed weight plus the weight of any tools and materials that are carried onto the ladder must be less than the load capacity.

Werner offers ladder made from fiberglass and aluminum. Each material has characteristics which make it best for certain applications, or one material may simply fit the personal preferences of the user. For example, if working around electricity users should select fiberglass products due to their non-conductive side rails.