English [Español]
United States [Change]
Products > Climbing-Equipment > Pump Jacks > PJ Series > PJ-SBF Aluminum Pump Jack Foldable Support Brace > PJ-SBF

Product Image
PJ-SBF

Resources

  •  
  •  
  •  View PJ Series Page
  •  Model PJ-SBF User Guide
  •  
  •  Replacement Parts
  • Share
  •  Email page | Print this page

Accessories

Complementary Products

You May Also Consider

PJ-SBF Aluminum Pump Jack Foldable Support Brace


Performance Overview

ComponentMaterial
Foldable Support BraceAluminum

The PJ series aluminum pump jack components are versatile, dependable, and easy to operate. Featuring field-replaceable components, they are compatible and interchangeable with the leading competitor. Pump jacks, aluminum poles, support braces, work benches, end rail kits, and safety nets are included in this series and work with Werner Nestable Stages.




Features

  • Foldable support brace (Rigid also available)
  • Verstaile, dependable, and easy to operate


Specifications

FeatureSize / Details
ComponentFoldable Support Brace
CertificationsANSI A10.8 (2001); OSHA
Approx. Shipping Weight Lbs.10
Approx. Cu. Ft. Per Unit0.71




Package Contents

Part NumberQtyDescription

Dimensions

FeatureSize


Additional PJ Series Models

Model No.ComponentApprox. Shipping Weight Lbs.Approx. Cu. Ft. Per UnitBuy Online
PJ-100Pump Jack353.47
PJ-12PPole280.85
PJ-18PPole421.27
PJ-24PPole561.69
PJ-6PPole150.43
PJ-ERNEnd Rail Kit201.16
PJ-ERWEnd Rail Kit201.16
PJ-PCPole Connector140.46
PJ-PF-4Pole Foot30.15
PJ-SBFFoldable Support Brace100.71
PJ-SBRRigid Support Brace142.72
PJ-SNSafety Net100.89
PJ-WBWork Bench202.06


Do they have a spike for a pole jack foot on soft ground?

Asked by: Chief
For this we would recommend our pole anchors. Model SPJ-PA-4
Answered by: Werner Customer Care
Date published: 2017-01-12

How do i get the pump jack over a support brace in the middle of a run to raise the jack over it?

Asked by: kfsierra
To pass an intermediate support brace on a pump jack system, temporary support braces are required. The temporary support brace is installed above the intermediate brace so that the intermediate brace can be removed while passing. Refer to the instructions for further details on passing an intermediate brace.
Answered by: Werner Customer Care
Date published: 2015-02-25

How do I know when my safety net is no longer serviceable?

Asked by: John
Per OSHA safety nets need to be inspected once a week for wear, damage, and other types of deterioration. If the net has any sort of rip, hole, or tear, the net needs to be taken out of service.
Answered by: Werner Customer Care
Date published: 2016-05-10

What are the diminsions of the bracket the pole sets in? 3" x 3"?

Asked by: Ozzie
The PJ-SBF Support Brace is designed to hold the 3" X 3" aluminum pump jack pole.
Answered by: Werner Customer Care
Date published: 2013-10-22

HAVE THE PJ 100 ALWAYS BEEN MADE IN CHINA

Asked by: BRIAN
Yes the PJ-100's have always been made in China.
Answered by: Werner Customer Care
Date published: 2015-04-14

WHAT IS A SUPPORT BRACE FOR A SYSTEM OVER 24FT? HOW IS IS ATTATCHED AND WOULDNT IT GET IN THE WAY OF THE JACK?

Asked by: JTC
To pass an intermediate support brace on a pump jack system, temporary support braces are required. The temporary support brace is installed above the intermediate brace so that the intermediate brace can be removed while passing. Refer to the instructions for further details on passing an intermediate brace.
Answered by: Werner Customer Care
Date published: 2015-01-27

if construction company working on my apt. building leave poles up during storm, should lightening become a safety issue?

It appears the aluminum poles have no grounding, and lightening storms are very common at this time...are they serving as lightening rods?
Asked by: billy boy
Do not use in inclement weather or high winds. Go to the following OSHA link: http://www.lightningsafety.noaa.gov/resources/OSHA_FS-3863_Lightning_Safety_05-2016.pdf
Answered by: Werner Customer Care
Date published: 2017-03-07

What is the length of the workbench

Asked by: Anonymous
Closed is 20.450" and opened is 31.695"
Answered by: Werner Customer Care
Date published: 2016-07-26

Werner post rubber

Can the rubber in the aluminum posts be replaced thanks
Asked by: Oscar
We don't have replacement parts for the poles. They cannot be replaced.
Answered by: Werner Customer Care
Date published: 2016-06-08

are the aluminum poles compatible with the steel pump jacks and workbench?

I am wondering if I can use the aluminum poles with the steel pump jacks and work bench holder or do i need to use wood poles?
Asked by: JL
The aluminum pumpjack poles are designed to be used with the aluminum pumpjack system. The steel pumpjacks are designed to be used with a wooden pole. The grip on the steel pumpjack will not hold on the rubber of the aluminum pole.
Answered by: Werner Customer Care
Date published: 2014-03-25
  • y_2017, m_9, d_21, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_39
  • loc_en_US, sid_PJ-SBF, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_werner



Different types of ladders are designed to keep you safe and productive when climbing or standing. Using the wrong style of ladder or simply ignoring the limitations of climbing equipment can result in a fall or serious injury.
Height is referring to the actual ladder height. Extension ladders should be 7 to 10 feet longer than the highest support or contact point, which may be the wall or roof line. The highest standing level is four rungs down from the top. The highest permitted standing level on a stepladder is two steps down from the top.

Reach height is the maximum reach assuming a 5’6” person with a vertical 12” reach.
Ladders are designed to safely hold up to a specific amount of weight. The Werner Performance System defines five different capacities using a color and star rating system. The Duty Rating is defined as the maximum safe load capacity of the ladder. A person’s fully clothed weight plus the weight of any tools and materials that are carried onto the ladder must be less than the load capacity.

Werner offers ladder made from fiberglass and aluminum. Each material has characteristics which make it best for certain applications, or one material may simply fit the personal preferences of the user. For example, if working around electricity users should select fiberglass products due to their non-conductive side rails.