English [Español]
United States [Change]
Products > Climbing-Equipment > Planks > 5500 Series > 5510-19 10 ft Aluminum Decked Aluma-Plank

Product Image
5510-19

Resources

  •  
  •  
  •   View 5500 Series Page
  •  
  •  
  •  Replacement Parts
  • Share
  •  Email page | Print this page

Accessories

Complementary Products

You May Also Consider

5510-19 10 ft Aluminum Decked Aluma-Plank


Performance Overview

Side Rail LengthApprox. WidthDuty Rating/Sq FtLoad Capacity
10 ft19-1/16 in75 lbs250 lbs

5500 series Aluminum Decked ALUMA-PLANK® for use with steel scaffolds. Duty rating is 75 pounds/square foot. Perforated tread for slip resistance.




Features

  • For Use With Steel Scaffolds
  • 19-1/16 in wide, 10 ft long aluminum decked plank


Specifications

FeatureSize / Details
Side Rail Length10 ft
Approx. Width19-1/16 in
Duty Rating/Sq Ft75 lbs
Load Capacity250 lbs
MaterialAluminum
CertificationsANSI A10.8 (2001); OSHA
Approx. Cu. Ft. Per Unit4.11
Approx. Shipping Wt. Lbs.32

Available in twist-proof, assembled in USA version as 5510-19USA


Package Contents

Part NumberQtyDescription

Dimensions

FeatureSize
Approx. Width19-1/16 in
Side Rail Depth4 in


Additional 5500 Series Models

Model No.Side Rail LengthApprox. Cu. Ft. Per UnitApprox. Shipping Wt. Lbs. Buy Online
5507-19
Available in twist-proof, assembled in USA version as 5507-19USA
7 ft2.9125
5508-19
Available in twist-proof, assembled in USA version as 5508-19USA
8 ft3.3128
5510-19
Available in twist-proof, assembled in USA version as 5510-19USA
10 ft4.1132


(11 Questions : 11 Answers)

Product Q&A

Ask your questions. Share your answers.

 
 
« Back
 
 
5510-19 10 ft Aluminum Decked Aluma-Plank
 
1 answer

Scaffold plank and extension ladder use on atairs

Customer avatar
by
Rose
Maryland, USA
7 months ago
Customer avatar
by
Rose
Maryland, USA
Age: 25-34
Gender: Male
I have two Werner ladders and a scaffold plank. I need to paint walls in a two story stairwell. Is it appropriate to use one ladder partially on a stair/partially on the first landing (uneven leg length) and the other on a landing above, spanning the two ladders with a plank? I cannot reach the ceiling any other way. Want to know if the ladder rungs on the ladder on the stair will remain parallel so that I can safely place the plank on them, span the distance and place the other end on the second ladder.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
You cannot use two extension ladders and a scaffold plank in the manner that you described.
7 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
5507-19 7 ft Aluminum Decked Aluma-Plank
 
1 answer

5607-19 vs 5507-19

Customer avatar
by
Strokr383
MS
6 months ago
Customer avatar
by
Strokr383
MS
Age: 45-54
Gender: Male
what is the difference between 5607-19 & 5507-19
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
The 5607-19 is 19 1/16" wide,the side rail length is 7' and the side rail depth is 2". This is the 2-piece extrude aluma-board. Weighs 30 lbs.

The 5507-19 is the aluminum decked aluma-plank. It is 19 1/16" wide, side rail is 7' and side rail depth is 3". Weighs 25 lbs.

The rail depth is different, the top of the plank is different and it differs in weight.
6 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
5507-19 7 ft Aluminum Decked Aluma-Plank
 
1 answer

5607-19 vs 5507-19

Customer avatar
by
Strokr383
MS
6 months ago
Customer avatar
by
Strokr383
MS
Age: 45-54
Gender: Male
what is the difference between these two 5607-19 vs 5507-19
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
5607-19 side rail depth is 2" and weighs 30lbs. and is a 2-piece extruded aluma-board.

5507-19 side rail depth is 3" and weighs 25lbs. and is one piece.
6 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
5510-19 10 ft Aluminum Decked Aluma-Plank
 
1 answer

allowable deflection of planks

Customer avatar
by
Lance
Maryland, USA
8 months ago
Customer avatar
by
Lance
Maryland, USA
Age: 55-65
Gender: Male
which factor is used when determining the allowable deflection of your alum. planking? I am performing a job at a nuclear power station and they want to know if you use L/60 or L/240 for your allowable deflection.

thank you,

Lance Smith
design engineer
Excel Scaffold
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
5510-19 aluma planks are tested to the UL 1322- 2010 code. The allowable deflection for a 10’ or less plank is shown in table 8.1 on page 12- 1.5”. Test set up is shown in figure 8. The allowable deflection of 1 side rail is also outlined in table 8.1 along with the maximum allowable angle of twist – deflection 2.5”, twist 12 degrees. Test set up is outlined in figure 9.
8 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
5508-19 8 ft Aluminum Decked Aluma-Plank
 
1 answer

This is response to your answer to prev. question

Customer avatar
by
LadderMan
MI
7 months ago
Customer avatar
by
LadderMan
MI
You asked me "Where are you getting the duty rating of 250 lbs.?"
Here:
1. look just above on this page in the Specifications provided by Werner: "Load Capacity 250 lbs"
2. that info is repeated on the Werner's label.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
If you are talking about our catalog, page 44, that is for the PA200 series. Please clarify if this is where you found that information. Just to be clear the 75 lbs. duty rating/Sq. Ft., that is evenly distributed across the plank, not concentrated load.
7 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
5508-19 8 ft Aluminum Decked Aluma-Plank
 
1 answer

Load capacity (LC) contradiction

Customer avatar
by
LadderMan
Michigan, USA
8 months ago
Customer avatar
by
LadderMan
Michigan, USA
Age: Over 65
Gender: Male
The plank's sq. footage = (19-1/16" by 8') = 12 sq.ft.
With your indicated LC = 75 lbs / sq. ft., the total LC must be = 953 lbs.
Meanwhile you limited the total LC by 250 lbs.
Could you, please, clarify this contradiction?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Where are you getting the duty rating of 250 lbs.?
7 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
5508-19 8 ft Aluminum Decked Aluma-Plank
 
1 answer

Please clarify

Customer avatar
by
Anonymous
9 months ago
Customer avatar
by
Anonymous
We are using Task Master 8 foot aluminum extension plank. The sticker indicates a 250 pound working load. Does that mean we cannot ever have more than 250 pounds per plank? Or in otherwise, we can never have 2 people on the plank?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
You are correct. The max weight this plank can hold is 250lbs. This would be considered a 1 man plank.
9 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
5507-19 7 ft Aluminum Decked Aluma-Plank
 
1 answer

do you make any 7' x 19" aluminum decked planks that have more than a 250 lb. load capacity?

Customer avatar
by
P
Jackson, WY, USA
1 year, 2 months ago
Customer avatar
by
P
Jackson, WY, USA
Age: 55-65
Gender: Male
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Unfortunately we do not manufacture any planks for the dimensions you described. The closest model we manufacture would be the 2508 which is 20"x8'. The duty rating is 500lbs.
1 year, 2 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
5508-19 8 ft Aluminum Decked Aluma-Plank
 
1 answer

What is the maximum cantilevered length of 5508-19 plank

1 year, 4 months ago
Customer avatar
by
Dar
FF
Age: 45-54
Gender: Female
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Our stages are not meant to be cantilevered. We cannot suggest using the 5508-19 in this manner.
1 year, 4 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
5510-19 10 ft Aluminum Decked Aluma-Plank
 
1 answer

Can all 5500 series planks be use with the AC10-20-02 ladder jack?

Customer avatar
by
Home Improvement Dude
San Ramon, CA 94583, USA
1 year, 6 months ago
Customer avatar
by
Home Improvement Dude
San Ramon, CA 94583, USA
Age: 45-54
Gender: Male
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
We do not suggest using the 5500 series planks with ladder jacks. These are manufactured with hooks on the end to fit standard steel scaffolding.
1 year, 5 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2next>>
  • 2017-01-15 T09:48:22.368-06:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_5510-19, prod, sort_default
2next>>



Different types of ladders are designed to keep you safe and productive when climbing or standing. Using the wrong style of ladder or simply ignoring the limitations of climbing equipment can result in a fall or serious injury.
Height is referring to the actual ladder height. Extension ladders should be 7 to 10 feet longer than the highest support or contact point, which may be the wall or roof line. The highest standing level is four rungs down from the top. The highest permitted standing level on a stepladder is two steps down from the top.

Reach height is the maximum reach assuming a 5’6” person with a vertical 12” reach.
Ladders are designed to safely hold up to a specific amount of weight. The Werner Performance System defines five different capacities using a color and star rating system. The Duty Rating is defined as the maximum safe load capacity of the ladder. A person’s fully clothed weight plus the weight of any tools and materials that are carried onto the ladder must be less than the load capacity.

Werner offers ladder made from fiberglass and aluminum. Each material has characteristics which make it best for certain applications, or one material may simply fit the personal preferences of the user. For example, if working around electricity users should select fiberglass products due to their non-conductive side rails.