English [Español]
United States [Change]
Products > Climbing-Equipment > Extension Ladders > D1500-2 Series > D1532-2 32 ft Type IA Aluminum D-Rung Extension Ladder > D1532-2

Product Image


  •  View D1500-2 Series Page
  •  Series Comparison
  •  Replacement Parts
  • Share
  •  Email page | Print this page


Complementary Products

You May Also Consider

D1532-2 32 ft Type IA Aluminum D-Rung Extension Ladder

Performance Overview

SizeStyleReach HeightLoad CapacityPerformance Rating
32 ftMulti Section31 ft300 lbs

The D1532-2 aluminum extension ladders have a duty rating of 300 lbs and have extra heavy duty I-beam side rails. The base and fly sections separate easily and can be used separately. Guide brackets help to ease operation when raising and lowering the fly section. The exclusive ALFLO® rung joint means TWIST-PROOF® performance every time. TRACTION-TRED® D rungs are slip resistant, and the rugged shoes rest flat or are held in spur position with the SHU-LOK® feature. Rugged spring-loaded locks operate smoothly. Mar-resistant end caps protect the surface ladder is resting against.


  • Exclusive ALFLO® rung joint means TWIST-PROOF® performance
  • 1-3/4 in slip-resistant TRACTION-TRED® D-rungs
  • Heavy Duty extruded rung locks are spring loaded to operate smoothly
  • Base and fly separate easily for use as an extension or two single sections
  • Smooth operating pulley design. Enclosed shape protects pulley
  • Guide brackets mounted at the top and bottom of the rail for durability and smooth operation of fly section
  • Extra Heavy Duty I-beam rails
  • Rugged spring loaded locks operate smoothly
  • Rugged shoe rests flat or is held in spur position with SHU-LOK® feature
  • Stacked rail design provides increased rung width on fly section
  • Mar-resistant end caps


FeatureSize / Details
Size32 ft
Max. Safe Working Height29 ft
Max. Open Extended Length29 ft
StyleMulti Section
Load Capacity300 lbs
Rung TypeD-Rung
Foot MaterialSlip-resistant pad
Section x Rungs2 x 16
Number of Sections2
Base Width18-1/8 in outside rails
CertificationsANSI A14.2 (2007); OSHA
Reach Height31 ft
Approx. Shipping Weight Lbs.67
Approx. Cu. Ft. Per Unit12.2
Performance Rating

Package Contents

Part NumberQtyDescription


Rails Dimension3 in
Flange Dimension1-1/8 in
Rung Dimension1-3/4 in
Fly Width18-1/8 in

Additional D1500-2 Series Models

Model No.SizeMax. Safe Working HeightMax. Open Extended LengthApprox. Closed LengthReach HeightApprox. Shipping Weight Lbs.Buy Online
Not equipped with rope and pulley
16 ft13 ft13 ft8 ft16 ft30.5
D1520-220 ft17 ft17 ft10 ft20 ft37
D1524-224 ft21 ft21 ft23 ft45
D1528-228 ft25 ft25 ft27 ft56
D1532-232 ft29 ft29 ft31 ft67
D1536-236 ft32 ft31 ft18 ft34 ft80
D1540-240 ft35 ft35 ft20 ft37 ft89.5

D1532-2 32 ft Type IA Aluminum D-Rung Extension Ladder is rated 4.0 out of 5 by 1.
Rated 4 out of 5 by from A beast of a ladder I originally purchased this ladder about 10 years ago to help repair my roof. I recently sold it in near mint condition to a contractor that drove almost 3 hours to buy it from me for 300.00 cash! The workmanship and quality of this ladder was unbelievable. It was built like a tank. Thanks!
Date published: 2015-09-02
  • y_2017, m_9, d_22, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_D1532-2, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_werner

weather resistance

Hi at home depot website they have comparison charts to your company's extension ladders.. what i saw between 2 32ft ladders is the last point where one is weather resistance and the other isn't. can you please indicate what's the difference, between these two ladders beside the weather resistance and of course the working load weight. D1332-2 and D1532-2.. i'm a home owner with my gutter height of 24'8". i will be using this ladder to clean gutters and check my roofs. not in use i will be hanging the ladder inside my garage wall (out of the elements).
Asked by: Soupa2
The aluminum on the ladders is rust proof. However, there are some parts that may rust over time, depending on the environment. Some of these parts include rivets, nuts and bolts that attach the locks and shoes, and the spur plate on the shoes. This is true for both the D1332-2 and the D1532-2. They are made with the same type of aluminum. Besides the duty rating the only real difference would be that the D1532-2 uses a guide bracket to attach the base section to the fly section. The D1332-2 has interlocked rails. You can also separate the D1532-2 and use the base section as a straight ladder.
Answered by: Werner Customer Care
Date published: 2015-09-14

Need tips on reassembling this ladder

I needed to use one of the 16' sections and it came apart easy enough, but reassembling it is a bit challenging. Any suggestions? Thank you.
Asked by: Karen
To reassemble the D1500 series ladders, first make sure the base and the fly sections are oriented in the same direction. Then, starting at the bottom of the base section, slide the fly section up until all guides engage. Be sure all guides have fully engaged, and slide the fly section up until the rung locks are secured. Once the ladder is assembled, reattach the rope, and raise and lower the ladder to ensure it operates properly.
Answered by: Werner Customer Care
Date published: 2013-10-22

I have a D1532-2, which pole support(s) are available for this ladder

Asked by: Rick
Please contact Customer Care at 888-523-3370 Monday through Friday from 8:00 AM to 5:00 PM EST.
Answered by: Werner Customer Care
Date published: 2017-01-05

How should I secure the top of the ladder?

What is the maximum vertical height m the ladder could be set at with 1 horizontal for every 4 vertrical. Assuming full 29 foot extension
Asked by: Don
When the ladder is fully extended, the D1532-2 is 29 feet fully extended. At this height, using the 4 to 1 ratio, the top of the ladder will reach 28 feet vertically.
Answered by: Werner Customer Care
Date published: 2014-09-04

What is the storage length of this ladder

Asked by: Healthswim
The D1532-2 is made from two seperate 16 foot section. When the ladder is closed for storage, it is 16 feet long.
Answered by: Werner Customer Care
Date published: 2014-05-05

what is the storage length of 20 ft ladder

Asked by: raj
The storage length would be 121 3/4 inches.
Answered by: Werner Customer Care
Date published: 2016-05-21

What is the over-all weight of 40 ft. Black Tip #D1540-2

Needing to know weight of 40 ft ladder for our employees
Asked by: jimbob
89.5 pounds
Answered by: Werner Customer Care
Date published: 2017-02-22

do I need to tighten the leg base levelers of the ladder?

The leg levelers seem very loose and I understand are meant to rotate according to the angle relative to the distance from the wall onto which to ladder will be leaning against, however, my question is if any tightening is necessary before using it. The nuts and bolts holding them seem to be fixed already and are not loose, but have some side play, so this is why I am asking this question.
Asked by: Tom
The feet will have a small amount of play. They do not need to be tightened down
Answered by: Werner Customer Care
Date published: 2017-07-03

Where is this ladder (D1536-2) built?

I ordered one of these from Lowes, but when I went to pick it up, it was damaged. So I re-ordered it. This ladder takes a full month to deliver, so I am two months (hopefully) getting it.
Asked by: PAPA2506
Model D1536-2 is manufactured in Juarez, MX.
Answered by: Werner Customer Care
Date published: 2017-07-25

Fly rope attachment

We bought a D1536 about 20 years ago. Mostly, we've used it as separate sections, or just slightly extended - so, we never used the fly rope. Now, I need to use it. As it is, the (factory) rope just loops between the pulley and the bottom rung of the base section. The ends are joined with a factory-installed metal clamp. The clamp has a second slot that looks like it's meant to accept another line of the rope. But, the rope is too short to loop over the rung of the fly section. So, am I supposed to cut the rope? Or what? Thanks.
Asked by: George E
Please call customer care so we can send you a copy of the instructions for the rope assembly. 888-523-3370.
Answered by: Werner Customer Care
Date published: 2015-09-10
  • y_2017, m_9, d_22, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_31
  • loc_en_US, sid_D1532-2, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_werner

Different types of ladders are designed to keep you safe and productive when climbing or standing. Using the wrong style of ladder or simply ignoring the limitations of climbing equipment can result in a fall or serious injury.
Height is referring to the actual ladder height. Extension ladders should be 7 to 10 feet longer than the highest support or contact point, which may be the wall or roof line. The highest standing level is four rungs down from the top. The highest permitted standing level on a stepladder is two steps down from the top.

Reach height is the maximum reach assuming a 5’6” person with a vertical 12” reach.
Ladders are designed to safely hold up to a specific amount of weight. The Werner Performance System defines five different capacities using a color and star rating system. The Duty Rating is defined as the maximum safe load capacity of the ladder. A person’s fully clothed weight plus the weight of any tools and materials that are carried onto the ladder must be less than the load capacity.

Werner offers ladder made from fiberglass and aluminum. Each material has characteristics which make it best for certain applications, or one material may simply fit the personal preferences of the user. For example, if working around electricity users should select fiberglass products due to their non-conductive side rails.