English [Español]
United States [Change]
Products > Climbing-Equipment > Accessories > AC18 Series > AC18MT Platform > AC18MT

Product Image


  •  View AC18 Series Page
  •  Replacement Parts
  • Share
  •  Email page | Print this page


Complementary Products

You May Also Consider

AC18MT Platform

Performance Overview

User or Factory Installed

The AC18MT Platform is for use on the MT series multiladder. Slip-resistant surface for comfortable and secure standing. Aluminum construction. Easily kicks out of the way for safe climbing. Load capacity is 300 pounds.


  • Slip-resistant surface
  • Aluminum construction
  • Kicks out of way for easy climbing
  • 300 lbs load capacity


FeatureSize / Details
StyleMulti Purpose
User or Factory InstalledUser
Approx. Shipping Weight Lbs.4.5
Approx. Product Height17.28 in
Approx. Cu. Ft. Per Unit0.64

Package Contents

Part NumberQtyDescription



Additional AC18 Series Models

Model No.Buy Online

We bought our ladder at Home Depot, but they did not sell the platform. Does Lowe's sell them?

Asked by: Mike
Home Depot can purchase this item as well as Lowes. You can go to the following link to find the distributors in your area: http://www.wernerco.com/us/en/where-to-buy
Answered by: Werner Customer Care
Date published: 2016-10-13

Can the platform be adjusted to work on a vertical ladder?

Asked by: Alan
The AC18MT Platform can be used on the MT series ladders in either the extension ladder position or the step ladder position. The MT ladders should not be positioned so that the ladder is vertical.
Answered by: Werner Customer Care
Date published: 2015-07-26

Would like to know where I can get a couple of blue Knobs?

Hinge Release Plastic (Blue Gray) Knob, not the Hinge assembly
Asked by: Sargio
Please contact Customer Care at 888-523-3370 Monday through Friday from 8:00 AM to 5:00 PM. We don't have any replacement parts for the AC18MT.
Answered by: Werner Customer Care
Date published: 2016-12-06

Is there a work platform that will work with Werner Model # D6220-1

Asked by: DSO Dave
We currently do not manufacture a work platform that will fit with this series of ladder.
Answered by: Werner Customer Care
Date published: 2016-08-15

Ladder platform

Will the AC18MT platform fit my D1120-2 20' extention ladder? if not is one available?
Asked by: Frosty
Unfortunately no. The AC18MT will only fit on our MT ladders.
Answered by: Werner Customer Care
Date published: 2016-10-23

Will the AC18MT Platform fit on the D-1224-2 Extension Ladder

Asked by: Dave
The AC18MT Platform should only be used with the MT series ladders. The shape of the rungs on the MT ladder are larger than that of an extension ladder.
Answered by: Werner Customer Care
Date published: 2016-06-16

Will the platform fit a 6' Podium?

Asked by: Hank
This is only for the MT series ladders.
Answered by: Werner Customer Care
Date published: 2016-08-03

can this used on Werner 6-ft Fiberglass 250-lb Type I Step Ladder Item # 98148 Model # FS106

Asked by: twinsmobile
This can only be used on the MT series ladders.
Answered by: Werner Customer Care
Date published: 2017-01-03

Can the MT Ladder be Locked in an upside down "L" position, where the top could be used as a stand off from roof, and support a scaffold?

Can we use two MT styled ladders, where they were installed with a 'standoff' upside down "L" locked into both, and lean the ladders against the slope of a roof, then extend a temporary scaffold plank across both ladders?
Asked by: ToolTimeTim
You cannot
Answered by: Werner Customer Care
Date published: 2017-04-03

need both rails?

Can the platform be used on the rails when the ladder is separated as two scaffold bases?
Asked by: Dennis
No we do not suggest using the AC18MT when the ladder is set up in the scaffold position. This should only be used when set up as a stepladder.
Answered by: Werner Customer Care
Date published: 2016-10-23
  • y_2017, m_10, d_17, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_23
  • loc_en_US, sid_AC18MT, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_werner

Different types of ladders are designed to keep you safe and productive when climbing or standing. Using the wrong style of ladder or simply ignoring the limitations of climbing equipment can result in a fall or serious injury.
Height is referring to the actual ladder height. Extension ladders should be 7 to 10 feet longer than the highest support or contact point, which may be the wall or roof line. The highest standing level is four rungs down from the top. The highest permitted standing level on a stepladder is two steps down from the top.

Reach height is the maximum reach assuming a 5’6” person with a vertical 12” reach.
Ladders are designed to safely hold up to a specific amount of weight. The Werner Performance System defines five different capacities using a color and star rating system. The Duty Rating is defined as the maximum safe load capacity of the ladder. A person’s fully clothed weight plus the weight of any tools and materials that are carried onto the ladder must be less than the load capacity.

Werner offers ladder made from fiberglass and aluminum. Each material has characteristics which make it best for certain applications, or one material may simply fit the personal preferences of the user. For example, if working around electricity users should select fiberglass products due to their non-conductive side rails.