English [Español]
United States [Change]
Products > Climbing-Equipment > Accessories > 22-2R Series > 22-2R Fiberglass Rail Shield (comes in pairs) > 22-2R

Product Image


  •  View 22-2R Series Page
  •  Replacement Parts
  • Share
  •  Email page | Print this page


Complementary Products

You May Also Consider

22-2R Fiberglass Rail Shield (comes in pairs)

Performance Overview

User or Factory Installed

Designed to reinforce. Shields may also be used to repair ladder if rail cracks occur no higher than 3/4in below bottom rivet of bottom step or horizontal and all holes in the rail are intact. Rail shield(s) come with mounting hardware. (1 front and 1 rear kit per stepladder; 2 front kits needed for trestle ladder) User Installed Only


  • For use on the Rear Rail of specified step and platform ladders
  • Shields may be used to repair ladder if rail cracks occur no higher than 3/4 in below bottom rivet of bottom step or horizontal and all holes in the rail are intact
  • Kit includes one left rail shield, one right rail shield and mounting hardware
  • Rail shield for Front rails is sold separately. Model 22-2F or 22-3F (depending on model of ladder)


FeatureSize / Details
User or Factory InstalledUser
Approx. Shipping Weight Lbs.1
Approx. Cu. Ft. Per Unit0.04

Package Contents

Part NumberQtyDescription



Additional 22-2R Series Models

Model No.Buy Online

Which will it fit a Werner Model # FS108??

Asked by: Nick
This will not fit on the FS108.
Answered by: Werner Customer Care
Date published: 2016-06-15

rail shield for T7420

Can you please tell me what set of rail shields do I need for a T7420 ladder
Asked by: Chuck
Part number 22-3F for T7400 series(up through MK/Mark number 10).
Answered by: Werner Customer Care
Date published: 2016-06-15

is it ok??level master attachment on 3 legged ladder for leveling

Asked by: dave farnsworth
The 22-2R fiberglass rail shields are designed to reinforce the base of a fiberglass ladder, not for leveling the ladder on uneven surfaces. These rail shields do not fit on the fiberglass tripod ladders.
Answered by: Werner Customer Care
Date published: 2013-10-22
  • y_2017, m_9, d_24, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_22-2R, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_werner

Different types of ladders are designed to keep you safe and productive when climbing or standing. Using the wrong style of ladder or simply ignoring the limitations of climbing equipment can result in a fall or serious injury.
Height is referring to the actual ladder height. Extension ladders should be 7 to 10 feet longer than the highest support or contact point, which may be the wall or roof line. The highest standing level is four rungs down from the top. The highest permitted standing level on a stepladder is two steps down from the top.

Reach height is the maximum reach assuming a 5’6” person with a vertical 12” reach.
Ladders are designed to safely hold up to a specific amount of weight. The Werner Performance System defines five different capacities using a color and star rating system. The Duty Rating is defined as the maximum safe load capacity of the ladder. A person’s fully clothed weight plus the weight of any tools and materials that are carried onto the ladder must be less than the load capacity.

Werner offers ladder made from fiberglass and aluminum. Each material has characteristics which make it best for certain applications, or one material may simply fit the personal preferences of the user. For example, if working around electricity users should select fiberglass products due to their non-conductive side rails.